DLR engines - "home of high HP clones"
Clone / GX200





top plate with throttle kit
fits 4bolt valve cover engines.
Price: $25.00
walbro fuel pump
fuel pump used for gas or alky applications
Price: $20.00
ARC billet non adjustable flywheel
fits gx200 6.5 or gx160 5.5
Price: $105.00
ARC stk. length billet connecting rod
stock length 3.303

fits gx200 6.5hp and gx160 5.5hp

a must have if modifying engine
Price: $59.00
clone air filter adapter
Air filter Adapter for Clone w/ Choke Bracket and thick 2.0 mm gasket
Price: $13.00
clone chian guard
heavy duty chain guard for clone engines
Price: $20.00
blueprinted head
gf
Price: $60.00
blueprinted clone carburetor
This is a stock carb that has been blueprinted to the legal limit for akra clone engines
Price: $50.00
dyno CL1
the new CLONE CL1, has quickly became the cam to have for the box stock engines.
Price: $35.00
dyno CL1-m
Same camshaft as CL-1 with slightly reduced lift to meet check if you have the old rockers that won't allow CL-1 to meet profile.
CLONE CL1-M
Price: $35.00
CL1-MOD2
Same camshaft as CL-1 with lots more duration. NOT legal in akra rules
Price: $50.00
clone tillotson intake
Includes studs and required bolts and nuts
Price: $45.00
drilled clone jet
Clone Jet Drilled to you specified size
Price: $5.00
jet size:
offset timing key
advanced ignition timing key
Price: $7.00
Enter Option Name:
blueprinted stock rod.
Clone 3.303 Connecting Rod Retorqued and Honed.
Price: $10.00
ground intake valve
valve has been ground true. this is assurance for maximum valve seal
Price: $9.00
ground exhaust valve
valve has been ground true. this is assurance for maximum valve seal
Price: $9.00
valve cover with fitting installed
pulse fitting already installed for external fuel pump.
Price: $10.00
Chromoly push rods (pair)
Chromoly push rods for 6.5hp and 5.5 clone
Best available
Price: $25.00
high tention 26 pound valve springs (pair)
When these springs are used Billet Flywheel is HIGHLY recommended.
Price: $10.00
10.8 pounds springs (pair)
These springs are made from a high quality wire in order to last longer than a stock spring
Price: $8.00
Restrictor Plate .500 - Purple
Restrictor plate for Clone engine .500 Purple
Price: $10.00
RLV "mini" muffler
AKRA Legal Muffler for "Weiner" Pipe
Price: $17.00
rapp winer pipe blueprinted
blueprinted for maximum flow
Price: $24.00
clone flattop piston
Clone Flattop Piston STD bore
OEM Honda part
Price: $20.00
clone STD dished piston
stock dished piston
Price: $11.00
clone .010 dished piston
stock style piston .010 over bore
Price: $12.00
clone .020 dished piston
stock style piston .020 over bore
Price: $12.00
piston rings STD.
stock size rings for clone engine.
Price: $5.00
over size clone piston rings (file fit)
over sized piston rings for clone engine, file fit. available in .010, .020, .030
Price: $10.00
ring size:
140 emulstion tube
This E-tube provides a better fuel signal to the jet. Improves the low to mid RPM range performance legal for Superbox and Builders Prepared. ***NOT Box Stock legal***
Price: $10.00
Website provided by Vistaprint
Website
provided by Vistaprint