DLR engines - "home of high HP clones"
blueprinted clone carburetor (stock / restricted)
Our blueprinted carbs are hand picked for the best flow characteristics, then disassembled, max bored to .6145 and blueprinted to the limits that AKRA / WKA rules allow. Will fit all 6.5hp clone engines and Honda GX160 or GX200 engines.
Price: $50.00
class type:
velocity stack filter adapter
DLR high flow filter adapter, For use with 2-7/16 Air Filters, Includes Choke Hold, Gasket. AKRA / WKA Legal in Box-Stock, takes full advantage of the 1.375 maximum length
Price: $15.50
Clone air filter adapter
For use with 2-7/16 Air Filters, Includes Choke Hold, Includes Air Filter Adapter Gasket AKRA / WKA Legal
Price: $13.00
Drilled clone carburetor jet
drilled main jet
Price: $5.00
size:
Drilled low speed jet
helps improve botttom end rpms
Price: $5.00
size:
140 emulsion tube
This E-tube provides a better fuel signal to the jet. Improves the low to mid RPM range performance legal for Superbox and Builders Prepared. ***NOT Box Stock legal***
Price: $11.00
clone carburetor stock (ruxing)
stock clone carb.
Price: $20.00
clone carburetor rebuild kit
completer carb rebuild kit
Price: $8.00
float bow O-ring
o-ring for clone carb float bowl
Price: $1.75
Intake Manifold Insulator
carburetor Insulator
Price: $6.00
Carb Stud
stock carburetor stud
Price: $1.75
Throttle Pulling Rod
Throttle Pulling Rod for Clone
Price: $2.00
Restrictor Plate
Restrictor plate for Clone engine
Price: $10.00
Enter Option Name:
blueprinted clone carburetor (Builder prepared)
Our blueprinted carbs are hand picked for the best flow characteristics, then disassembled, max bored to .6245, fuel circuitry reworked for alcohol and blueprinted to the limits that AKRA / WKA rules allow. Will fit all 6.5hp clone engines and Honda GX160 or GX200 engines.
Price: $65.00
Stock Appearing Clone Carburator
Fully blueprinted, Clone modified carb it has a large bore .650 venturi .750 throttle bore. fuel circuitry reworked, custom emulsion tube, and specially cut throttle shaft and dummy choke. works well with a CL1 and mod-2 cam but it really performs with a .275 or .308 lift cam. Will fit all 6.5hp, 5.5hp, clone Honda GX200 and GX160, BSP yellow, Greyhound, Central Machinery, and equivalent clone engines.
Price: $80.00
Fuel type:
Idle Control Black Spring (black)
Clone Black Spring ( Idle Control Spring)
Price: $2.00
stock 6.5 emulsion tube
stock clone e-tube
Price: $4.50


Website Builder provided by  Vistaprint