DLR engines - "home of high HP clones"
Clone / GX200






ARC billet non adjustable flywheel
6619 fits gx200 6.5 or gx160 5.5
Price: $99.99
ARC Billet Flywheel, Adj. Timing
6618 for GX200/Clone The keyway is in the stock position Index marks are in 2° increments which allows up to 14° timing advance from the stock position (25°-39° range)
Price: $174.99
PVL flywheel
The running timing with a straight up key is 28 degrees and it is recommended to start with a running timing between 28 to 31 degrees.
Price: $64.99
offset timing key
advanced ignition timing key
Price: $8.50
Select key degree advance :
ARC billet connecting rod
ARC Rod Box Stock, 6.5 hp and 5.5hp clones Honda GX200, GX160 For use with the stock crankshaft and stock style (dished or flat top) piston in modified engines. A must have if modifying a engine, for other than stock class purposes.
Price: $59.99
Rod Length:
ARC billet long connecting rod
THESE RODS USES A .490" DIAMETER WRISTPIN NOT FOR USE WITH A STOCK PISTON. FOR USE WITH OUR WISECO PISTONS 3.707" (PISTON MILLING REQUIRED) 3.595" (NO MILLING REQUIRED)
Price: $84.99
rod length:
arc stroker rod
3.625" STROKER ROD FOR USE WITH +.175" STROKER CRANK FOR USE WITH OUR WISECO PISTONS (MILLING REQUIRED) THIS ROD USES A .490" DIAMETER WRISTPIN NOT FOR USE WITH A STOCK PISTON
Price: $84.99
ARC rod bearing 6394
REPLACEMENT ROD BEARINGS FITS 3.303" OR 3.313" OR 3.323" OR 3.595 OR 3.707" RODS ARC PART NUMBER 6394
Price: $19.00
ARC rod bolts 6383
REPLACEMENT ROD BOLTS ARC 6383
Price: $13.95
blueprinted stock rod.
Clone stock length Connecting Rod torqued checked and Honed.
Price: $12.00
rod length:
top plate with throttle kit
fits 4bolt valve cover engines.
Price: $20.00
Big Bertha Chain Guard
Big Bertha Protective Chain Guard Taller and longer than our standard guard for more protection. Works on 6.5 and 5.5 hp and 208cc and 212cc engines
Price: $25.00
wms fuel pump
fuel pump used for gas or alky applications
Price: $19.00
walbro style fuel pump
fuel pump used for gas or alky applications
Price: $14.00
Autolite Racing Spark Plug 3910X
The spark plug of choice for Box Stock Clone racing.
Price: $6.95
valve cover with fitting installed
pulse fitting already installed for external fuel pump.
Price: $10.00
blueprinted stock class head
machined to .285" depth, with light weight valves, hand picked springs for optimum pressure and spring installed height set. Valve seats are cut to minimum with 3 angles, valves lapped and seal checked, includes studs, grade 8 head bolts and complete rocker assemblies.
Price: $125.00
Big valve head 27mm Intake 24mm Exhaust
Clone head, with custom big valve seats and valves installed, full valve job seal checked, ported & polished high tension springs of choice, and milled to choice. recommended for mildly built engines, running under .300 lift at the valve, using stock appearing carburetors, or up to a 24mm aftermarket carb. Note to customer: all spring ratings were calculated using the factory rocker arm ratio of 1:1, if you plan on running ratio rockers on your set up you will need a different spring set- up to accommodate for the extra lift.
Price: $175.00
select amount to be milled off:
select spring type:
Big valve head 28.5mm Intake 25mm Exhaust
Clone head, with custom big valve seats and valves installed, full valve job seal checked, ported & polished, high tension dual pressure and milled to choice. recommended for more radical built engines, running over .300 lift at the valve, using larger cylinder bores and aftermarket carbs larger than 25mm. included springs specs are. SEAT PRESSURE » 55lbs. @ .812" OPEN PRESSURE » 83lbs. @ .570" COIL BIND » @ .370" lift
Price: $250.00
Select amount milled off:
head casting to start with:
Big valve head 32mm Intake 28mm Exhaust
Clone head, with custom big valve seats and valves installed, full valve job seal checked, ported & polished, high tension dual pressure and milled to choice. recommended for radical fully built engines, big bore stroker ect. running over .300 lift at the valve, using larger cylinder bores and aftermarket carbs larger than 25mm. included springs specs are. SEAT PRESSURE » 55lbs. @ .812" OPEN PRESSURE » 83lbs. @ .570" COIL BIND » @ .370" lift
Price: $350.00
DLR "winning advantage" springs (10.8 pound)
hand picked dyno cams green stripe improved springs to give you the DLR "winning advantage" springs, sold in pairs ( 2 springs) we do recommend you change the springs every 5-6 race days.
Price: $10.00
high tension 18 pound valve springs (pair)
High performance 18 pound valve springs will let your engine turn up to 7000+ rpm's. A must have for bigger cams and carbs. Not legal for stock class under BSP/WKA/AKRA rules. It is strongly recommended that you install a billet rod and flywheel if exceeding 6000 rpm. Do not use on cams with more than .275 lift as coil bind will occur.
Price: $10.00
high tension 22 pound valve springs (pair)
High performance 22 pound valve springs will let your engine turn up to 7000+ rpm's. A must have for bigger cams and carbs. Not legal for stock class under AKRA rules. It is strongly recomended that you install a billet rod and flywheel if exceeding 6000 rpm.
Price: $10.00
high tension 26 pound valve springs (pair)
High performance 26 pound valve springs will let your engine turn up to 8000+ rpm's. A must have for bigger cams and carbs. Not legal for stock class under AKRA rules. It is strongly recomended that you install a billet rod and flywheel if exceeding 6000 rpm.
Price: $10.00
Dual Valve Spring Kit Clone
Duel Valve Spring Kit for use with modified clones 8000+ rpms springs specs are as follows: SEAT PRESSURE » 55lbs. @ .812" OPEN PRESSURE » 83lbs. @ .570" COIL BIND » @ .370" lift
Price: $27.00
light weight retainers
light weight retainers
Price: $20.00
Valve Spring Shim
Available in .015", .030", .060" thickness
Price: $1.50
dyno stock class cams
WKA/AKRA legal
Price: $35.00
CL1 options:
dyno cheater stock cams
for modified's and builders prepared
Price: $50.00
Select cam profile:
dyno modified class cam
welded lobe modified cams These cams requires an upgraded spring package, billet rod, billet flywheel & larger than stock carburetor
Price: $100.00
cam profile:
Blueprinted intake valve
Valve has been ground true, and to the minimum legal specs, this allows for maximum valve seal and HP.
Price: $10.00
Blueprinted exhaust valve
Valve has been ground true, and to the minimum legal specs, this allows for maximum valve seal and HP.
Price: $10.00
Stainless steel valve
a must have when running a modified clone engine with larger than stock cam and high tension springs.
Price: $16.00
valve size:
HP THIN LASH CAPS
LASH CAPS (PAIR) THIN LIGHTWEIGHT LASH CAPS RECOMMENDED FOR ALL 32/28 MM VALVES
Price: $12.00
champion rocker arms 1:1 (HD)
Champion forged rocker arm assembly 1:1 ratio, Includes: Rocker Arms, Lock Nuts, and Studs
Price: $29.99
Chromoly push rods (pair) STD
Chromoly push rods for 6.5hp and 5.5 clone, Standard length.
Price: $26.00
tube size:
CUT TO LENGTH CHROMEMOLY PUSHRODS
CUT TO LENGTH CHROMEMOLY PUSHRODS 1/4" DIAMETER OR 3/16" DIAMETER
Price: $28.00
GUIDE PLATE 3/16" (HEAVY DUTY)
GUIDE PLATE 3/16" (HEAVY DUTY)
Price: $7.00
clone tillotson intake
Includes studs and required bolts and nuts
Price: $45.00
RLV "mini" muffler
AKRA Legal Muffler for "wiener" Pipe
Price: $18.00
Rapp velocity wiener pipe (turned up)
Spec header designed to meet the WKA/AKRA engine rules for BOX STOCK classes. .750 max outside diameter, .635 inside diameter.
Price: $38.00
Rapp V2 pipe
Most popular header used in the big pipe classes three Stages made to curve away from driver.
Price: $36.00
ID sizes:
Rapp T4 pipe kit
.930" pipe from Rapp provides more top end than previous versions. This is the newest version pipe, includes brace and drilled Allen bolts
Price: $70.00
RLV BIG PIPE MUFFLER
1 5/16 mounting flange Can be used on most all staged headers This muffler fits all staged headers we sell. Available as Stock (with round holes) and Modified (with square holes)
Price: $39.00
muffler type:
STAINLESS STEEL MUFFLER CLAMP
T-BOLT DESIGN ALLOWS CLAMP TO BE TIGHTENED BUT WILL HOLD ITS SHAPE AND WILL NOT DISTORT AND LOOSEN WITH HEAT.
Price: $6.95
honda flattop piston over sized
Honda Flattop piston OEM Honda part
Price: $18.00
piston size:
honda STD bore flattop piston kit
std bore honda fattop piston and rings
Price: $36.50
Low Tension Ring Set with +.005" Compression Ring
Dyno testing has shown an average of 2 tenths gain in horsepower when using Low Tension Ring Sets over stock OEM rings. Set comes with a standard Scraper Ring, standard Oil Ring and +.005" over Compression Ring
Price: $15.50
File Fit Low Tension Compression Ring
will have a closer end gap resulting in less blow by.
Price: $7.00
ring size:
wiseco piston
forged piston kit
Price: $79.99
piston size:
H.D. WRISTPIN .490
H.D. WRISTPIN .490" O.D. .110" WALL OR SOLID THIS WRISTPIN DOES NOT FIT THE STOCK TYPE PISTON FOR USE WITH OUT WISECO PISTONS
Price: $20.00
wrist pin type:
.490 wristpin snap ring
for use in our wiseco pistons
Price: $1.00
wiseco ring set
piston ring set
Price: $27.00
piston size:
extra free crank bearing
extra free bearings for Cylinder Block and Sidecover. AKRA / WKA legal.
Price: $10.00
ARC BILLET STROKER CRANK
ARC BILLET STROKER CRANK + .175" STROKE
Price: $275.00
ARC BILLET SIDE COVER
ARC BILLET SIDE COVER
Price: $139.00
BIG BORE CLONE KIT
new clone block with all the proper machine work done ready to assemble for the do it your self racer ! block deck surfaced trued, bored & honed to a 2.795" or 2.815" bore of choice piston top machined for zero deck height. Kit includes block with machine work done, wiseco forged piston kit, our HD wristpin of choice, ARC 3.707 billet long rod.
Price: $345.00
select bore size:
select wrist pin type:
Website Builder provided by  Vistaprint